© 2016 by The Carpenter Group. Proudly created with Wix.com

Lifting Clamps

Single Drum Lifter, No. 52

  • Lifts steel drums with or without heads removed

  • Drums can be lifted from either horizontal or vertical positions and then reversed

  • Snaps onto drum and is held there by its spring-loaded cam even when there is no load

  • Note: THIS CLAMP IS NOT SUITABLE FOR LIFTING PLATES OR SHEETS

Technical Specs.

Please reload

Duplex Hand Grips

  • Designed to carry or pull any object that will fit into its jaws

  • Features one piece cast alloy body for strength and durability

  • Grips and releases automatically

Technical Specs.

Please reload

GX Series

  • "GX" clamp is entirely drop forged and heat treated

  • Can be used for both vertical and horiznotal-to-vertical lifting through 180 degrees

  • Exclusive feature is a patented wear indicator system. When any of cam's straight line, convex teeth are flattened between unique wear indicator grooves, it is time to change the cam

  • Note: The Pad and Cam should be replaced at the same time

  • Clamps are 100% Proof Tested and Certificate of Test supplied with each clamp

  • Minimum WLL of at least 10% of the maximum WLL

Technical Specs.

Please reload

GXL Series

  • Available in a 1/2, 1 and 2 ton capacity

  • Can be used for both vertical and horizontal to vertical lifting through 180 degrees

  • Drop forged and heat treated components, with gripping surfaces of case hardened alloy steel

  • Exclusive feature is a patented wear indicator system. When any of cam's straight line, convex teeth are flattened between unique wear indicator grooves, it is time to change the cam

  • Note: The Pad and Cam should be replaced at the same time

  • Newly designed "Cam Engaging Locking Lever" keeps the cam in contact with the plate. The tension arm and spring mechanism facilitate attaching and removing the clamp. These clamps will not lift plate when in the "lever open" position

  • Clamps are 100% Proof Tested and Certificate of Test supplied with each clamp

  • Minimum WLL of at least 10% of maximum WLL

  • Warning: Never tamper with a clamp's tension arm and spring mechanism during a lift

Technical Specs.

Please reload

Horizontal Plate

  • One man can handle plates with this clamp

  • Dual springs hold cam on the work while the second clamp is placed

  • Sold in pairs ONLY

  • Clamps are 100% Proof Tested and Certificate of Test supplied with each clamp

Technical Specs.

Please reload

Locking "E" Series

  • Clamp lifts from either horizontal or vertical position

  • Clamps turn plates through 90 degrees

  • Locks open or closed with a lever

  • Has large throat that gives a secure bite and wide grip range